EasyManuals Logo

Silvercrest SAS 7.4 LI C1 User Manual

Silvercrest SAS 7.4 LI C1
73 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
10 
GB
IE
NI
SAS 7.4 LI C1
1) To open the dirt container -, press the release button and remove the
dirt container -.
2) Remove the dust filter from the dirt container -.
3) Empty the dirt container -.
4) Pull the dust filter bag with its holder out of the dust filter .
5) Rinse the dust filter bag out in cold water and wait until it is completely
dry before reinserting it into the dust filter . Do not dry it with hot air.
6) Reinsert the dust filter into the dirt container -. When doing so, ensure
that the dust filter is seated squarely and that the rubber lip seals the dirt
container -.
7) Replace the dirt container - on the motor unit again:
Push the plastic tab on the underside of the handheld vacuum cleaner
into the recess on the dirt container -.
Press the release button and push the dirt container - onto the motor
unit at the same time.
Let go of the release button so that the restraint engages in the recess.
The dirt container - is now firmly seated on the motor unit.
8) Clean the housing and both nozzles with a lightly moistened cloth. For stubborn
soiling use a mild detergent on the cloth.
9) Dry all parts thoroughly before using the appliance again or storing it.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Silvercrest SAS 7.4 LI C1 and is the answer not in the manual?

Silvercrest SAS 7.4 LI C1 Specifications

General IconGeneral
BrandSilvercrest
ModelSAS 7.4 LI C1
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals