EasyManuals Logo

Silvercrest SAS 7.4 LI C2 User Manual

Silvercrest SAS 7.4 LI C2
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
GB
IE
NI
CY
 3
SAS 7.4 LI C2
Description of the appliance
1 Wet suction nozzle
2 Crevice nozzle
3 Wall bracket
4 Mains adapter
5 Barrel plug
6 On/off switch
7 Charge indicator lamp (red/green)
8 Release button
9 Dust filter bag
0 Dust filter
q Dirt container
NOTE
This appliance is supplied with non-charged batteries. The batteries must be
charged before first use.
Technical data
Mains adapter 4
Input voltage/current 100 - 240 V
~
(AC), 50/60 Hz, 0,2 A
Output voltage/current 9.6 V
(direct current) / 500 mA
Polarity of the barrel plug
(positive terminal inside, negative
terminal outside)
Protection class
II /
(double insulation)
Type designation ZDM096050BS-C
Protection type
IP20 - Protected against solid foreign bodies
with a diameter of ≥ 12.5 mm / No protection
against water
Appliance
Input voltage/current 9,6 V
(direct current) / 500 mA
Collection volume
Dust: max. 400 ml
Liquids: max. 150 ml
Rechargeable batteries
Capacity 2000 mAh
Rechargeable battery 7.4 V (2 x 3.7 V Lithium-ion rechargeable batteries)
Battery charging time (with
completely discharged battery)
Approx. 5 hours
Running time with full charge Approx. 22 minutes

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Silvercrest SAS 7.4 LI C2 and is the answer not in the manual?

Silvercrest SAS 7.4 LI C2 Specifications

General IconGeneral
BrandSilvercrest
ModelSAS 7.4 LI C2
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals