■ 8
│
GB
│
IE
SAS 7.4 LI E4
Prior to first use
1) Remove all packaging materials from the appliance.
2) Press the dust filter bag
9 and the dust filter 0 a little way into the dirt
container
q. They might have loosened during transport and thus not be
positioned correctly inside the dirt container q.
3) Place the dirt container
q on the motor unit w:
– Push the plastic tab on the underside of the handheld vacuum cleaner
into the recess on the dirt container
q.
– Press the release button 8 and push the dirt container q onto the motor
unit w at the same time.
– Let go of the release button 8 so that the restraint engages in the
recess. The dirt container
q is now firmly seated on the motor unit w.
Information about the batteries
■ This handheld vacuum cleaner is powered by rechargeable lithium-ion batteries.
Before using the handheld vacuum cleaner for the first time, the batteries must
be charged for around 6 hours.
■ For care of the batteries, we recommend the following:
Once the batteries have been charged, disconnect the mains adapter
4 from
the mains socket. Do not connect the handheld vacuum cleaner to the mains
socket again until the suction power has become noticeably weaker and the
charge indicator lamp 7 is flashing green.
NOTE
► The appliance is equipped with a temperature monitor to protect the batter-
ies. At high ambient temperatures (in rare cases) the charging process may
be interrupted or the appliance may switch off automatically:
– The charge indicator lamp
7 lights up red during charging. The
charging process is interrupted and resumes automatically as soon as
the temperature of the appliance has dropped.
– The charge indicator lamp 7 flashes red three times at one second
intervals during operation. The appliance switches off automatically.
Allow the appliance to cool for 20–30 minutes before switching it on
again.
To Next Page
Loading...
Need help?
General
