13GB/IE/NI
Charging the battery
B
[5] [3][7]
1. Hold the housing [3] with one hand. Hold the watch strap [5] with the other hand.
2. Pull the housing [3] and the watch strap [5] apart at the p USB mark [4].
3. Connect the revealed USB plug [7] to a free USB port.
4. When the battery is fully charged: Disconnect the USB plug [7] from the USB port.
5. Connect the USB plug [7] to the watch strap [5].
NOTES:
Make sure that the contacts of the USB plug [7] correctly engage with the contacts
in the USB port. If the product does not charge, turn the USB plug 180° and plug it
into the USB port again.
The product turns on automatically as soon as it is connected with the USB port.
The product cannot be operated during charging.
The charging status is shown in the display [2].
A charging cycle with a charging current of approx. 85 mA takes approx. 1.5 hours.
To Next Page
Loading...
