Silvercrest SBL 3.5 A1 User Manual

11 US-EN
Once charging is complete, remove the
micro-USB plug of the charging cable
13
.
Using the product
Establishing a
Bluetooth
®
connection
Press and hold the ON / OFF key
2
for 2
seconds until the ON / OFF / CONNECTION
indicator LED
9
flashes blue and a melody
sounds. The product will now attempt to con-
nect to the playback device (e.g. smartphone
or computer).
Switch on the playback device and activate
the Blue tooth
®
function. The product identifica-
tion on the playback device will be SBL 3.5 A1.
Then approve the connection with the prod-
uct. Please note the requirements of the
software on the playback device. The
ON / OFF / CONNECTION indicator LED
9
will light up blue and a melody sound.
The maximum range of the connection is
32.8 feet / 10 m, but may be reduced to the
geometry of the space (obstructing furniture,
walls, etc.).
The playback device must support Bluetooth
®
Standard 4.1. Otherwise you may not be
able to use all the functions listed below.
Functions of the buttons
on the product
Start a playlist on your playback device. Set the
volume on the playback device to Maximum. The
volume on the product can be adjusted as de-
scribed below. Music is played back through the
speakers
10
.
The product has 4 buttons. These control the
following functions:
Button Function
- Press 2 seconds:
switch on the product
- Press 2 seconds:
switch off the product
- Press briefly during playback: pause
or continue playing
- Press briefly during playback: skip to
next song in the playlist
- Press once during playback:
increase volume by one level; Hold
during playback: continue increase
volume
- Press briefly during playback: Jump to
beginning of current song
- Press briefly consecutively twice: skip
to the previous song in the playlist
286212_silv_Bluetooth-Lautsprecher_content_US.indd 11 05.04.17 09:40

Silvercrest SBL 3.5 A1 Specifications

General

Brand	Silvercrest
Model	SBL 3.5 A1
Category	Speakers
Language	English