GB/IE/NI 15
When the battery is drained, a signal will sound every
30 seconds and power LED will flash red. The battery must
be recharged. You can also use the device whilst charging.
Switching the device on / off
Press and hold the button
1
for approx. 2 seconds to
switch the device on and activate the Bluetooth
®
function. A
ascending tone sequence will sound and the power LED will
flash blue.
Press and hold the button
1
again for approx. 2 seconds
to switch the device off and disable the Bluetooth
®
function.
A descending tone sequence will sound.
Connecting the device to a
Bluetooth
®
playback device
The device must be paired with a compatible Bluetooth
®
playback
device before use.
Be sure the device is off and the Bluetooth
®
playback device
is on.
Set the Bluetooth
®
playback device to scan for Bluetooth
®
devices. Please refer to the operating instructions from the man-
ufacturer of your Bluetooth
®
playback device for a detailed
description.
To Next Page
Loading...
