Silvercrest SBL 4 B2

38 GB/IE
Using the Bluetooth
®
speaker
Establishing a Bluetooth
®
connection
Press and hold the Play / Pause,
On / Off button
7
until the ON / OFF /
CONNECTION indicator LED
8
flashes
blue and a signal of sound sequence.
The speaker will now attempt to connect
to the playback device (e.g. smartphone
or computer).
Switch on the playback device and acti-
vate the Blue tooth
®
function. The speaker
identification on the playback device will
be SBL 4 B2. Then approve the connection
with the Bluetooth
®
speaker. Please note
the requirements of the software on the
playback device. The signal LED will light
up blue and a acoustic signal.
The maximum range of the connection is
approx. 10 m, but may be reduced to the
geometry of the space (obstructing furni-
ture, walls, etc.).
The playback device must support Blue-
tooth
®
standard 4.1. Otherwise you may
not be able to use all the functions listed
below.