Silvercrest SCA 5.00 A1 - Switching the Camcorder on and off

SilverCrest SCA 5.00 A1 Introduction
Write protection disabled Write protection enabled
While the write protection is enabled the indication
SD will appear in the lower-right corner of the display,
and when you press the recording button a double
beep will be heard.
Switching the Camcorder On and Off
• Press the On/Off button (18) to power the camcorder on.
• Press the On/Off button (18) to power the camcorder off.
When opening the display, the camcorder will power
on automatically. As soon as you close it, the device
will power off.
The following table shows an overview of the different states of the
power indicator (4):
Colour Description
Green Powered on
Alternate blinking red/green Recording in progress
Red Data processing in progress
Blinking green Photo self-timer enabled
Quickly blinking green Photo self-timer enabled, last 2
seconds
English - 21