15
GB
2. Insert the connecting piece4 in the mo-
tor unit2.
3. Fit the mixing blade5 to the connect-
ing piece4.
4. Place the ring7 on the container8.
The handles are positioned in the re-
cesses of this container.
5. Take the bowl6 out of the freezer bag
and place it on the ring7.
6. Place the lid3 on the ring7 and turn
clockwise to secure.
7. Insert the power plug9 in the wall
socket and move the 0/I switch1 to I.
WARNING! Risk of material damage!
~ While making ice cream do not switch
the ice-cream maker off and then back
on. The ice cream mix would otherwise
freeze to the bowl6 and block the mix-
ing blade5.
8. Now pour the prepared mix into the
bowl6 through the opening.
9. Leave the machine on until the ice
cream has the required consistency.
NOTE: If the ice cream has not become suf-
ficiently firm after 40 or so minutes, put in
the freezer until it has reached this firmness.
10. Move the 0/I switch1 to 0 to switch
the ice-cream maker off.
11. Unplug9 the appliance.
12. Turn the lid3 anti-clockwise and remove.
NOTE: Removing the lid3 will be easier if
you grasp it with both hands on the right
and left and then lift off.
13. Remove the ice cream you have made
using a rubber scraper or wooden
spoon (not supplied).
The ice cream produced will be spoon-
able. You can eat it straightaway, or if
you prefer it to be firmer, leave it in the
freezer for a while.
Recipes
For recipe suggestions, please consult the
online user instructions.
Disposal
Packaging and device must be disposed of
according to the environmental regulations
of your country.
Trouble-shooting
If your device fails to function as required,
please read the corresponding chapter in
the online user instructions.
__384916_Eismaschine_Short_OS.book Seite 15 Freitag, 5. November 2021 12:05 12
To Next Page
Loading...
Need help?
General
