To Next PageTo Next PageWhat to do if my Silvercrest SFR 3.7 A1 Vacuum Cleaner is not working?
If your Silvercrest Vacuum Cleaner isn't working, there could be a couple of reasons. First, check if the appliance is charged and charge it if necessary. If charging doesn't solve the issue, the appliance might be defective, and you should contact Customer Services.
Why is my Silvercrest SFR 3.7 A1 not working?
If your Silvercrest Vacuum Cleaner isn't working, the first thing to check is whether it's charged. If not, charge the appliance. If charging isn't the issue, then the appliance may be defective.
How to fix a Silvercrest SFR 3.7 A1 Vacuum Cleaner spray bottle that does not work?
If the spray bottle on your Silvercrest Vacuum Cleaner isn't working, there are a few things to check: * First, make sure the spray bottle has water or cleaning agent in it and refill it if it's empty. * Next, ensure the tip of the spray bottle is set to SPRAY or STREAM, not OFF. * If neither of those solutions work, the spray bottle may be defective, and you should contact Customer Services.
How to fix streaks appearing during cleaning with Silvercrest Vacuum Cleaner?
If streaks appear during cleaning with your Silvercrest Vacuum Cleaner, it could be due to a few reasons. The blade might be dirty, so try cleaning it. Alternatively, the blade could be worn; in that case, remove the blade sideways from the vacuum attachment, moisten the round end with water or detergent, turn it over, and push it back into the vacuum attachment. It's also possible that you're using too much cleaning agent, so try using less.
Why does my Silvercrest SFR 3.7 A1 Vacuum Cleaner leave streaks while cleaning?
Streaks appearing during cleaning with your Silvercrest Vacuum Cleaner can be due to a few reasons. It could be that the blade is dirty, so try cleaning it. Alternatively, the blade might be worn; in this case, remove the blade sideways from the vacuum attachment, moisten the round end with water or detergent, turn it over, and push it back into the vacuum attachment. Finally, too much cleaning agent might have been added, so try using less.
What to do if the spray bottle does not work on my Silvercrest SFR 3.7 A1?
If the spray bottle on your Silvercrest Vacuum Cleaner isn't working, first check if it has water or cleaning agent inside; if not, refill it. Also, make sure the tip of the spray bottle is set to SPRAY or STREAM, not OFF.
General| Brand | Silvercrest |
|---|---|
| Model | SFR 3.7 A1 |
| Category | Vacuum Cleaner |
| Language | English |
