Why does my Silvercrest SSRA1 return to base before cleaning is done?
If your Silvercrest Vacuum Cleaner returns to the charging dock before finishing its cleaning cycle, it's likely due to a low battery. To resolve this, ensure you charge the vacuum cleaner fully.
How to charge Silvercrest SSRA1 Vacuum Cleaner when battery is low?
If the battery of your Silvercrest Vacuum Cleaner is low, use the remote control to return the robot vacuum cleaner to the charging dock. If the robot vacuum cleaner is on Standby, ensure it is charged so it will always have enough power to clean.
Why is my Silvercrest SSRA1 not charging?
If your Silvercrest Vacuum Cleaner isn't charging, make sure there's a solid connection between the vacuum cleaner and the charging contacts on the charging dock. This ensures proper charging.
What to do if Silvercrest Vacuum Cleaner gets stuck?
If your Silvercrest Vacuum Cleaner gets stuck while cleaning, it might be due to obstructions like cables, curtains, or rugs. The vacuum cleaner will attempt to free itself, but if it can't, you'll need to manually assist it.
Why is my Silvercrest SSRA1 remote not working?
If the remote control for your Silvercrest Vacuum Cleaner isn't working, try the following: 1. Replace the remote's batteries, ensuring they are correctly installed. 2. Make sure the vacuum cleaner is switched on and has sufficient battery power. 3. Clean the infrared sensor on both the remote and the vacuum cleaner with a cotton cloth. 4. Avoid using the remote near other devices that emit infrared rays.
What to do if Silvercrest Vacuum Cleaner is stuck?
If your Silvercrest Vacuum Cleaner is stuck, move it to a clear area and restart it.
What to do if battery malfunctions in Silvercrest Vacuum Cleaner?
If the battery of your Silvercrest Vacuum Cleaner is malfunctioning, replace it.
What to do if fan malfunctions in Silvercrest Vacuum Cleaner?
To address a fan malfunction in your Silvercrest Vacuum Cleaner, try restarting the device. If the problem persists, further assistance is needed.
What to do if the anti-collision sensor module malfunctions on my Silvercrest Vacuum Cleaner?
If the anti-collision sensor module malfunctions on your Silvercrest Vacuum Cleaner, restart the robot vacuum cleaner.
What to do if my Silvercrest SSRA1 has a battery malfunction?
If there is a battery malfunction in your Silvercrest Vacuum Cleaner, replace the battery.
General| Dustbin Capacity | 0.3 liters |
|---|---|
| Dust capacity | 0.3 liters |
| Noise level | 65 dB |
| Type | Robot Vacuum |
| Cord length | Cordless |
Explains the meaning of various symbols and icons used throughout the manual for clear communication.
Defines the specific purpose and limitations for which the robot vacuum cleaner is designed.
Identifies and labels all the individual parts and components of the robot vacuum cleaner.
Provides detailed technical specifications, power ratings, dimensions, and system requirements for the device.
Lists all items included in the product packaging to ensure completeness upon purchase.
Details crucial safety precautions regarding the use, handling, and storage of batteries to prevent hazards.
Outlines specific risks associated with battery leakage and the protective measures to take.
Guides the user through the process of fully charging the robot vacuum cleaner before initial use.
Provides instructions on how to correctly install the side brushes onto the robot vacuum cleaner.
Explains the procedure for powering the robot vacuum cleaner on and off using its main switch.
Describes how to initiate and start the automatic cleaning cycle of the robot vacuum cleaner.
Details how to temporarily stop the cleaning process and control the robot's movement.
Explains the different cleaning modes available and how to select them for optimal performance.
Describes the automatic cleaning mode where the robot navigates and cleans the room systematically.
Explains the spot cleaning mode for concentrated cleaning of heavily soiled areas.
Details the MAX mode for increased suction power for deeper cleaning of carpets or stubborn dirt.
Explains the corner cleaning mode designed for efficient cleaning of edges and corners.
Describes the function and placement of the virtual wall for defining cleaning boundaries.
Guides on setting up a cleaning schedule for automated operation at specific times.
Instructions for downloading, installing, and registering the companion app for smart control.
Step-by-step guide to connect the robot vacuum cleaner to your home Wi-Fi network.
Details on linking the robot vacuum cleaner to the mobile application for remote operation.
Explains how to disconnect the robot vacuum cleaner from the app or Wi-Fi network.
How to initiate, control, and monitor cleaning cycles directly through the mobile application.
How to select and activate the classic cleaning mode using the mobile application interface.
How to enable the MAX mode for increased suction power via the app for deeper cleaning.
How to activate the spot cleaning mode through the app for targeted dirt removal.
How to command the robot vacuum cleaner to return to its charging dock using the app.
Instructions for creating and managing cleaning schedules via the mobile application.
How to view historical cleaning data, durations, and patterns through the app.
Information on checking the wear and tear of product parts like brushes and filters via the app.
Accessing and modifying various settings for the robot vacuum cleaner through the mobile app.
Procedure for performing a factory reset on the robot vacuum cleaner via the application.
Guide on how to share control of the robot vacuum cleaner with other users through the app.
Detailed steps for removing, emptying, and cleaning the dust collector and its filters.
Instructions for cleaning the main and side brushes to maintain optimal performance.
Guidance on cleaning the exterior parts of the robot, including sensors and wheels.
Steps for cleaning the charging contacts on both the robot and the charging dock.
Specific instructions for the proper disposal of the robot vacuum cleaner, including its battery.
To Next Page
