Silvercrest SSRA1 - Schedule; Operation via app; Install and register

15 GB/IE/NI
Operation Operation / Operation via app
Before using the virtual wall
5
you need to
install the 2 AA batteries (included). Open the
battery cover and insert the batteries. Please
note the indicated polarity.
Set the switch on the virtual wall
5
to “ON“
to switch it on.
Set the switch on the virtual wall
5
to “OFF“
when not in use.
Position your robot vacuum cleaner in the
“Cleaning area“ as shown.
Schedule
For easy cleaning you can set the time and schedule
for future cleaning on the robot vacuum cleaner or
in the app.
Setting the time
Hold the “Set schedule“ button
15
for approx.
2 seconds with the robot vacuum cleaner
“Awake“. The robot vacuum cleaner will emit
a sound, the display
1
will flash and the robot
vacuum cleaner will enter “Set clock mode”.
Press the “Decrease / Increase time“ buttons
16
,
17
to set the current time. Use “Set schedule“
15
to switch between minute, hour and day.
Press the “Auto mode“ button
14
to switch
between 12 hour and 24 hour display.
After setting the time, press the “Start / Pause”
button
13
to save.
Note: If no buttons are pressed for 15 seconds,
the robot vacuum cleaner will exit the time setting;
the settings will be lost.
Setting the schedule
Press the “Set schedule“ button
15
with the robot
vacuum cleaner “Awake“. The robot vacuum
cleaner will beep and “Symbol“ and “MON“
will blink. The robot vacuum cleaner will enter
“Set schedule mode”.
Press the “Decrease / Increase time“ buttons
16
,
17
to set the desired cleaning time. Use the
“Set schedule” button
15
to switch between
minute, hour and day.
After setting the schedule, press the “Start / Pa use”
button
13
to save. The robot vacuum cleaner
will start cleaning according to the schedule.
Deleting the schedule
Press the “Set schedule“ button
15
with the
robot vacuum cleaner “Awake“. The robot
vacuum cleaner will beep and “Symbol“ and
“MON“ will blink. The robot vacuum cleaner
will enter “Set schedule mode”.
Press the “Auto mode“ button
14
to delete the
stored schedule; the display will read
1
“--:--“.
Press the “Auto mode“ button
14
again to re-
activate the schedule. The display
1
will show
the last schedule programmed. After setting the
schedule press the “Start / Pause” button
13
to
save.
Operation via app
The product can be operated remotely via app.
Install and register
The “SILVERCREST SSRA1 Robot“ app is available
for free from the Apple App Store and Google Play.