13 GB
Do not use any abrasive, aggressive cleaners
or hard brushes to clean the product and its
accessories.
Cleaning the vacuum attachment
1
,
wiper
4
and motor unit
9
Wipe down the parts with a slightly damp
cloth.
Do not let any water or other liquids enter
the product interior.
After cleaning: Let all parts dry completely.
Cleaning the water container
6
, dirt
water container
8
and suction head
12
Rinse the parts in water and/or mild
detergent.
After cleaning: Let all parts dry completely.
Cleaning the microfiber covers
The microfiber covers
3
can be cleaned in a
washing machine and in a dry cleaner.
Clean the microfiber covers
3
with a mild
setting, up to 60 °C.
After cleaning: Let the microfiber covers
3
dry completely.
Troubleshooting
Problem Solution
The product is
not working
Charge the product.
Streaks keep
appearing
during
vacuuming
Remove the blade by
pulling it sideways from the
vacuum attachment
1
.
Moisten the blade on the
round end with water
and/or detergent. Pull
the blade back into the
vacuum attachment.
Use less detergent while
cleaning the window.
The spray of the
wiper
4
is not
working
Refill the water
container
6
.
Turn the spray nozzle
5
to SPRAY or STREAM.
Storage
Store the product in the original packaging
when it is not in use.
Store the product at a dry location out of the
reach of children.
Store the product with an emptied
water container
6
and dirt water
container
8
only.
To Next Page
Loading...
