61 GB/IE
Initial use
The batteries have been installed when you first
purchase the product. Before first use, remove the
protective battery strips sticking out from the bat-
tery compartment. The multi-function thermometer
will then switch on automatically.
Inserting/Replacing batteries
Before replacing the battery, ensure that the device
has been switched off.
When the batteries become weak, the battery warning
symbol will appear on the display
. Temperature
measurements will still be possible but the batteries
will have to be replaced as soon as possible.
If the battery warning symbol
and
“Lo“ flash on the display, the batteries must
be replaced immediately. If the batteries
are too weak, the thermometer will switch
off automatically.
Replace the batteries as follows:
Remove the battery
cover
3
.
Remove the empty batteries
from the battery compartment.
Insert the new batteries into
the battery compartment un-
til they audibly and noticeably
437990_2304_V2.0_silv_Multifunktionsthermometer_Content_OS.indd 61437990_2304_V2.0_silv_Multifunktionsthermometer_Content_OS.indd 61 15.06.23 14:2215.06.23 14:22
To Next Page
Loading...
