To Next PageTo Next Page
Need help?Do you have a question about the Silvercrest KH 8105 and is the answer not in the manual?
General| Brand | Silvercrest |
|---|---|
| Model | KH 8105 |
| Category | Thermometer |
| Language | English |
Guidance on familiarizing with the device and its functions before first use.
Device is for indoor measurement of body, room, and surface temperatures; includes clock/stopwatch.
Lists package contents: thermometer, battery, protective head guard, and user manual.
Function of the MEM/SET button for memory retrieval and setup.
Function of the EAR button for ear temperature measurement.
Function of the FOREHEAD button for forehead temperature measurement.
Description of the measuring head component of the thermometer.
Description of the LC display component of the thermometer.
Description of the LED indicators for fever status.
Description of the protective head guard and its use.
Description of the battery compartment lid.
Description of the battery used in the thermometer.
Description of the battery change symbol on the LC display.
Description of symbols related to time, date, and measurement modes on the LC display.
Description of symbols for ear, standard, scan, and forehead measurement modes.
Provides measurement method, power supply, consumption, and memory capacity.
General instructions for safe use and handling of the device.
Warning about life dangers/accidents for children from packaging and unsupervised use.
Warning about life danger if batteries are swallowed; requires immediate medical help.
Device not designed for individuals with limited physical, sensory, or mental abilities.
Do not expose the device to extreme temperatures, strong vibrations, heavy loads, or direct sunlight.
Guarantee does not cover damage from incorrect handling or unauthorized interference.
Do not use the device if it is damaged to avoid injuries or inaccurate readings.
Remove battery for prolonged periods; do not recharge or take apart.
Caution: Danger of explosion; battery must never be recharged and avoid short-circuiting.
Ensure correct polarity when inserting battery; clean contacts if necessary.
Batteries must not be disposed of in domestic waste; keep away from children and fire.
Avoid contact with skin/eyes; rinse affected area with water or consult a doctor if contact occurs.
Step-by-step guide on how to remove the battery fuse from the compartment.
Description of the internal alignment and self-test of the LC display upon switching on.
Instructions for setting date/time, including 12/24-hour format selection.
Procedure for standard mode measurement of ambient and room temperatures.
Steps for accurate ear temperature measurement, including preparation and reading results.
Acclimatise the appliance to room temperature for at least 30 minutes before forehead measurement.
Relax for about 5 minutes before measuring forehead temperature.
Wait at least 30 minutes after physical activity or bathing before measuring forehead temperature.
Ensure forehead or temple is clean, free of injuries, sweat, cosmetics, or ointment.
Usage for non-contact surface temperature measurements of objects like milk or bathwater.
How to use the integrated watch as a stopwatch for pulse rate calculation.
Procedure to return the device to standard mode from other modes.
Procedure to switch between Celsius (°C) and Fahrenheit (°F) units.
Describes how measurements are stored, retrieved, and managed up to 9 entries.
Instructions for replacing the device's lithium battery, including polarity and closing.
Troubleshooting for errors like 'Appliance does not react' or resetting issues.
Troubleshooting the 'Battery symbol' error indicating a weak battery.
Troubleshooting the 'Lo' error for readings below 32.0°C / 89.6°F.
Troubleshooting the 'Hi' error for readings above 42.9°C / 109.2°F.
Troubleshooting the 'ErrE' error related to ambient temperature being outside the operating range.
Troubleshooting the 'ErrU' error indicating no measurement result after measurement.
Troubleshooting the 'ErrH' error detected during the device's self-test.
Troubleshooting the 'ErrP' error indicating a hardware problem.
Detailed instructions on cleaning the sensitive sensor lens with 70% medical alcohol.
Instructions for cleaning the device housing with a soft, damp cloth.
Details the 3-year warranty, proof of purchase, and contact procedures for service.
Provides contact details for warranty claims and service inquiries in the UK and Ireland.
Guidance on disposing of recyclable packaging materials at local recycling facilities.
Instructions for environmentally friendly disposal of the product according to WEEE directive.
Information on CE marking and compliance with European directives for medical products.
Contact details for the manufacturer, Shenzhen Dongdixin Technology Co. Ltd.
Contact details for the EU representative, Shanghai International Holding Corp. GmbH.
