23 GB/IE
Operation
9. Press the “EAR” button
3
again to carry out further
measurements.
10. The appliance automatically switches off if it is not
operated for longer than 1 minute. This application is
not stored in the device.
In order to return to standard mode, proceed as follows:
1. Press the “FOREHEAD” button
4
and the “EAR”
button
3
repeatedly at the same time until the LC
display
5
again shows the room temperature, date
and time, as well as the
symbol (Illustration D).
2. You are now back in standard mode.
Measuring time (stopwatch mode)
The integrated watch can be used as a stopwatch in the
range of 0.01 seconds to 3 minutes. This function is required
to calculate the pulse rate. The appliance has to be switched
over to stopwatch mode to do so.
1. If the sleep mode has been activated, activate the
thermometer again by pressing any button before
taking a measurement.
2. Press the “FOREHEAD” button
4
and the “EAR”
button
3
repeatedly at the same time until the LC
display
5
shows the symbol (Illustration F).
3. The stopwatch is started by pressing the “FOREHEAD”
button
4
and stopped by pressing it again.
IB_61572_KH8105_LB3.indd 23IB_61572_KH8105_LB3.indd 23 10.12.2010 14:23:01 Uhr10.12.2010 14:23:01 Uhr
To Next Page
Loading...
