64 GB/IE
The minute display will
flash on the display.
Using the SET button
6
select the current minute.
Confirm by pressing the
MEM button
7
.
If no button is pressed within 30 seconds, the
basic settings menu will automatically close.
Bluetooth
®
will flash
on the display. Activate
or deactivate Bluetooth
®
using the SET button
6
(ON will appear on the
display for activation, OFF will appear on the
display for deactivation). Confirm by pressing the
MEM button
7
.
The device will save the basic settings and switch
off automatically.
Activating/deactivating
the key tone
You can activate/deactivate a key tone on the device.
When the key tone has been activated, a beep will
sound each time a button is pressed and after every
measurement.
To activate the key tone, briefly press the SET
button
6
when the device is switched on. A loud-
speaker symbol
will appear on the display.
437990_2304_V2.0_silv_Multifunktionsthermometer_Content_OS.indd 64437990_2304_V2.0_silv_Multifunktionsthermometer_Content_OS.indd 64 15.06.23 14:2215.06.23 14:22
To Next Page
Loading...
