26 GB/IE
Charging the battery
Connect the plug of the
USB cable
10
to a free
USB port on your computer
or to a USB power adaptor.
Connect the charging
adaptor
10
to the charging
contact
5
on the back of
the product. The charging
adaptor is held in place
magnetically.
5
10
The product vibrates once at the start of the charging process.
When the battery is fully charged: Disconnect the USB cable
10
from the
product and from the USB port.
NOTES:
Make sure that the charging pins
8
correctly engage with the charging
contacts
5
.
The product turns on automatically as soon as it is connected with the
USB port.
The product cannot be operated during charging.
The charging status is shown in the display
2
.
A charging cycle on approx. 120 mA charging current takes approx.
2 hours.
To Next Page
Loading...
