Silvercrest SGRS 3.7 A1 - Initial Start-up; Selecting the Operating Mode

SilverCrest SGRS 3.7 A1
English - 17
 Insert the USB plug of the charging cable (D) into the
USB socket of the USB mains adapter (C) and connect
the free plug of the charging cable (D) to the charging
socket (6) on the bottom of the face cleansing brush
(A). Now insert the USB mains adapter (C) into a live
power socket.
 Whilst charging, the integrated light indicator of the
face cleansing brush (A) will flash.
 If the battery is fully charged, the light indicator will
light up permanently. Remove the USB mains adapter
(C) from the power socket and then the charging cable
(D) from the charging socket (6).