Silvercrest SGRS 3.7 A1 User Manual

SilverCrest SGRS 3.7 A1
English - 19
10. Initial start-up
10.1. Selecting the operating mode
Use the On/Standby button (4) to control the different
phases of the cleansing cycle:
One press: The cleansing cycle starts and the light
indicator lights up permanently. Use buttons (3) and (5)
to reduce or increase the vibration. There are six vibration
levels available. The last level you select will be restarted
in the next cleansing cycle.
Two presses: The cleansing mode stops, the device
goes in standby mode and the light indicator lights up
permanently. You now have the chance to prepare your
face for the massage.
Three presses: The massage cycle starts and the light
indicator lights up permanently. Use buttons (3) and (5)
to reduce or increase the vibration. There are three
vibration levels available. The massage cycle always
starts at the highest vibration level.
Four presses: The massage cycle ends and the device
is switched off. The light indicator does not light up.
The following operating steps described refer to the
Quick Start Guide, which is enclosed with this device. This
contains all the operating steps in illustration form without
additional explanations.

Silvercrest SGRS 3.7 A1 Specifications

General

Brand	Silvercrest
Model	SGRS 3.7 A1
Category	Hair Removal System
Language	English