Silvercrest SHDB 2200 A1 - Operation

11
GB
Operation
Switching on/off and adjusting
speed
1. Connect the mains plug4 with an easi-
ly accessible wall socket.
2. Using the on/off switch5 and the
switch for the speed settings, you can
switch the device on and select the de-
sired speed for the air flow:
=off
= slow; gentle air flow
= fast; strong air flow
3. After drying, switch the on/off switch5
to (off) and pull out the mains plug.
Selecting the temperature
Use the switch for the hot air settings6 to se-
lect the desired temperature for the air flow:
= low temperature
= medium temperature
= high temperature
Cooling function
In order to improve the durability of your
hair style, you can cool the hair after it has
been styled with hot air using the but-
ton7 .
Keep the button7 held down during dry-
ing in order to get a cool air flow, irrespec-
tive of the starting temperature.
When you no longer require the cool air
flow, release the button7 .
Ionisation function
Ions are continuously applied to the hair.
This reduces the static loading of the hair
and improves its stylability.
The hair becomes soft, smooth, glossy, and
easier to style.
NOTE: we recommend the use without at-
tachments for the optimum activity of the
ions.
Styling attachment
The styling attachment9 makes it possible to
direct the air flow onto specific sections of
hair.
1. Place the styling attachment9 onto the
front of the hair dryer, so that it locks
into position.
2. The styling attachment9 can be rotat-
ed into any position desired.
3. Do not remove the styling attachment9
from the hair dryer until it has cooled
down.
Diffuser
Use the diffuser attachment10 to create
curls and gentle waves in the lengths and
tips, as well as for body and volume at the
roots of the hair.
1. Figure A: place the diffuser10 onto
the hair dryer.
2. Switch on the hair dryer.
3. Use:
- For long hair: draw diffuser10
through to the tips, and style the hair
into gentle waves in the direction of
the roots.
- For short hair: use the diffuser10 to
work on the hair around the roots,
generating body and volume.
4. Do not remove the diffuser10 from the
hair dryer until it has cooled down.
Cleaning
Clean the device regularly. Particularly en-
sure that the air inlet and outlet are free of
dust, hair and fluff.
For additional information on clean-
ing and looking after the device and
accessories, please see the online
user instructions.
__367024_2010_Haartrockner DC_KURZ_B8.book Seite 11 Dienstag, 13. April 2021 12:07 12