- 4 -
Utilisation
In use, the infra red lamp
9
creates warmth and it
penetrates into the deeper layers of skin. This has a
stimulating effect and is thus effective against
tiredness and tensions.
With vibration switched on in the massage head
1
,
a relaxing and pain relieving effect can be achie-
ved for tired muscles through gentle massage.
Taking into use
Unpacking
• Take the Infra Red Massage Appliance and the
accessories from the packaging.
• Remove all packaging material.
Attention:
Do not permit small children to play with plastic
packaging. There is a risk of suffocation!
Adjusting the rotatable parts of the
massage appliance
• With the revolvable ring
3
the massage head
1
can be turned through a radius of 270°.
Thus either the infra red lamp
9
or the massage
head
1
is directed at the body part to be treated.
The grip
7
can be turned in five levels over a
radius of 90°.
• For this, press the locking button on the swing
arm
8
down and move the grip
7
.
• Release the locking button
8
and turn the grip
7
until it engages.
Equipping the massage head with
accessories
Select, according to the application requirement, an
accessory (
0
,
q
,
w
,
e
,
r
,
t
) for the massage:
The roller accessory
0
:
Stimulates the blood circulation. Guide the roller
accessory back and forth over the whole of the
body.
The nub accessory
q
:
The 21 nubs are suitable for deep massage and
large muscle groups.
The surface accessory
w
:
Use this accessory on the whole body to relieve
muscle pain and tensions.
The Shiatsu accessory
e
:
The Shiatsu accessory simulates the finger posture
of a masseur and is suitable for deep massage.
The knead-massage accessory
r
:
This accessory is suitable for kneading simulation
and deep massage.
The accessory for exacting massage
t
: Use
this accessory for the massage of individual muscle
groups.
1. Release a possibly fitted accessory from the
massage head
1
, in that you hold the grip
cavity
2
and pull it off.
2. Place the accessory (
0
,
q
,
w
,
e
,
r
,
t
) of
your choice on the massage head
1
and pay
attention that the round curbs of the massage
head
1
and the accessory (
0
,
q
,
w
,
e
,
r
,
t
) lie one on top of the other.
3. Push the accessory (
0
,
q
,
w
,
e
,
r
,
t
) onto
the massage head then check to make sure that
it is firmly fixed.
To Next Page
Loading...
Need help?
General
