- 2 -
Hand-Held Infrared
Massager
Introduction
Congratulations on the purchase of your new appli-
ance.
You have clearly decided in favour of a quality
product. These operating instructions are a part of
this product. They contain important information in
regard to safety, use and disposal. Before using the
product, familiarise yourself with all of these opera-
ting and safety instructions. Use the product only as
described and only for the specified areas of
application. In addition, pass these documents on,
together with the product, to any future owner.
Intended use
This appliance is intended exclusively for the relaxa-
tion and stimulation of muscles in the human body
by massage. The appliance in intended exclusively
for domestic use. Do not use it for commercial pur-
poses!
Items supplied
• Hand-Held Infrared Massager
• Roller accessory
• Nub accessory
• Surface accessory
• Shiatsu accessory
• Knead-massage accessory
• Accessory for exacting massage
• Operating instructions
Before taking the appliance into use, check that all
items are present and free of visible damage.
Appliance description
Figure A:
1 Massage head with massage accessory
2 Grip cavity to release accessory
3 Revolvable ring
4 Switch Infrared
5 Switch Massage
6 Power cable
7 Grip
8 Locking button for swing arm
9 Infrared lamp
Figure B:
0 Roller accessory
q Nub accessory
w Surface accessory
e Shiatsu accessory
r Knead-massage accessory
t Accessory for exacting massage
Technical data
Mains voltage: 220 - 240 V
~
/ 50 Hz
Power consumption: 13 W
Protection class: II /
CO Time: 20 Minutes
CO Time
The CO Time (Continuous Operation Time) details
how long an appliance can be operated without
the motor overheating and becoming damaged.
After the appliance has run for this period it must be
switched off until the motor has cooled itself down.
To Next Page
Loading...
Need help?
General
