22
GB
7. Operation
DANGER! Risk of injury
through scalding!
~ It is always necessary to close the lid|1
when brewing coffee, as boiling water
may otherwise spray out!
~ During the brewing process, hot steam
escapes upwards through the lid|1. The
lid becomes hot. Do not touch it or put
your hands or other body parts in the
steam under any circumstances.
~ Do not open the lid|1 during the brewing
process.
~ Fill the coffee machine|6 only to the
maximum filling level (10), as hot water
may otherwise spray out.
~ Do not bend over the coffee machine|6
when you open the lid|1 and the con-
tents are still hot. There is a danger of
being scalded by escaping steam.
WARNING! Risk of material dam-
age!
~ Fill in water at least up to the 2 marking
on the water level indicator|5. Other-
wise the device may overheat.
~ Do not fill in water above the 10 mark-
ing on the water level indicator|5. If too
much water is put into the water tank|4,
it will run out again through the over-
flow|3 and under the base of the coffee
machine.
~ Never put fluids other than fresh drink-
ing water into the coffee machine|6.
7.1 Drip Stop
The filter holder|11 has an anti-drip
valve|10. This ensures that no coffee drips
out of the filter, when you remove the ther-
mal jug|8.
• In order to ensure that the valve opens
during the brewing process, it is impor-
tant that the filter holder|11 is inserted
correctly and the thermal jug|8 with
lid|9 is positioned completely in the cof-
fee machine. The lid|9 on the ther-
mal jug|8 opens the anti-drip
valve|10. Otherwise the filter
can overflow.
7.2 Opening and closing the
lid
In order that the appliance can work correct-
ly, it is important for the thermal jug|8 to be
placed in the coffee machine|6 and that the
lid|9 is closed.
• Figure B: lid|9 opened, coffee
can be poured out.
• Figure C: lid|9 closed, the thermal
jug|8 can be placed in the coffee ma-
chine|6 or coffee is kept hot.
7.3 Brewing coffee
1. Lift up the lid|1 of the coffee machine|6.
2. Only fill fresh, cold tap water into the
water tank|4. Hot or carbonated water
can result in malfunctions.
Fill the water tank|4 up to desired mark-
ing with water (for not more than 10
cups: 10).
3. Hold the filter holder|11 by its han-
dle|12 and lower it into the holder of
the coffee machine. Turn the filter hold-
er|11 in such a way that it can be low-
ered completely into the holder. Fold the
handle|12 of the filter holder|11 to-
wards the front.
To Next Page
Loading...
