Silvercrest SKMS 180 A1 - Maintenance and Disposal; Before First Use

21 GB/IE
 Lay the power cord[8] and
extension cords in such a way
that they may not be tripped over
or otherwise damaged.
 No action is needed from users
to shift the product between 50
and 60Hz. The product adapts
itself for both 50 and 60Hz.
 Fill the product at least up to
the MINmark
[] or with 7g
(approx. 1 tbsp) of coffee beans.
Do not fill the product with more
than 70g (approx. 8 tbsp) of
coffee beans.
Do not exceed the
MAXmark
[].
Cleaning and care
m
WARNING! Risk of injury!
Disconnect the power plug
[8]
from the socket outlet before
cleaning and when not in use.
m
CAUTION! Risk of injury!
Care shall be taken when
handling the sharp cutting
blade
[6] and when emptying
the container
[2].
 Do not pull the power plug out
of the socket outlet by the power
cord
[8].
 Protect the product, its power
cord and power plug
[8] against
dust, direct sunlight, dripping and
splashing water.
 Protect the product against heat.
Do not place the product close to
open flames or heat sources such
as stoves or heating appliances.
 Before first use
 Remove the packaging material. Check if all
parts are complete.
 Operate the product empty in order to
let any production residues evaporate
(approx. 45 seconds).
 Before use
 Clean the product (see “Cleaning and care”).
 Place the product on a suitable and level
surface.
 Unwind the power cord
[8] from the cord
retainer
[5]. Guide the power cord through the
recess on the edge of the housing.
 Connect the power plug
[8] to a socket outlet.
Now, the product is ready for use.