SilverCrest SKS 15 A1
8
English
Option 1: Only connecting a TV set
Connect one of the supplied audio/video cables to the group of three
RCA sockets (Output) on your SilverCrest SKS 15 A1. The different
cables and sockets are colour-coded for easier connection. If your TV
set features a corresponding group of three sockets for the audio and
video signals, you can connect the cable that you previously connect-
ed to the Output sockets of your SilverCrest SKS 15 A1 here. If your
TV set only features a SCART socket, use the supplied SCART
adapter (INPUT). The adapter also features the same colour code.
Option 2: Connecting a TV Set for video and stereo system for
audio
Carefully separate the yellow wire of the audio/video cable so you can
plug it to the TV set separately. If your TV set has a RCA socket for
video input, you can connect the yellow RCA connector to this socket.
Otherwise proceed as for Option 1 and use the SCART adapter
(INPUT). In this case the red and white sockets for audio input are not
used on the TV set. Instead of connecting the corresponding cables
to the adapter, connect them to your stereo system. Use a suitable
input (other than Phono).
Connecting a DVD player
Connect one of the supplied audio/video cables to the group of three
RCA sockets (Input). The different cables and sockets are colour-
coded for easier connection. If your DVD player also features a corre-
sponding group of three sockets for audio and video signals, you can
connect the cable directly to these. If your DVD player only features a
SCART socket, use the supplied SCART adapter (OUTPUT). The
adapter also features the same colour code.
To Next Page
Loading...
Need help?
General
