SilverCrest SKS 15 B1
8 English
Option 2: Connecting a TV Set for video and stereo system for
audio
Carefully separate the yellow wire of the audio/video cable so you can plug it to the TV set sepa-
rately. If your TV set has a RCA socket for video input, you can connect the yellow RCA connector
to this socket. Otherwise proceed as for Option 1 and use the SCART adapter (INPUT). In this case
the red and white sockets for audio input are not used on the TV set. Instead of connecting the
corresponding cables to the adapter, connect them to your stereo system. Use a suitable input (oth-
er than Phono).
Connecting a DVD player
Connect one of the supplied audio/video cables to the group of three RCA sockets (Input). The
different cables and sockets are colour-coded for easier connection. If your DVD player also fea-
tures a corresponding group of three sockets for audio and video signals, you can connect the
cable directly to these. If your DVD player only features a SCART socket, use the supplied SCART
adapter (OUTPUT). The adapter also features the same colour code.
Connecting the microphones
Now you can connect one or both microphones. To do so insert the jack plug of the microphone
cable into one of the microphone inputs (MIC1 or MIC2) of the SilverCrest SKS 15 B1. It is irrele-
vant which of the two sockets you use. You only have to remember that each input socket is as-
signed to one of the two microphone gain controls.
Connecting to the mains power supply
First connect the mains adapter to your SilverCrest SKS 15 B1 and then to an easily accessible
mains socket. The device is then ready for operation.
To Next Page
Loading...
Need help?
General
