SND 3600 D2
GB
│
IE
│
NI
│
7 ■
Connecting to a computer
System requirements
Operating system: Windows XP/Vista/7/8/10, Mac OS 10.6–10.12
Slot: USB connection (USB 2.0)
♦ Connect the micro-USB plug on the USB cable
8
to the micro-
USB port
3
on the scanner.
♦ Connect the USB plug on the USB cable
8
to a powered-on
PC. The computer recognises the new hardware and starts in-
stalling the drivers automatically. This process can take a around
a minute. The PWR LED lights up as soon as the scanner is
properly connected.
Installing the software
Installation on Windows
CAUTION!
► Important files may be changed or overwritten during the
installation of the software! Before installing the installing
the software, make a backup of your original files to ensure
that you will be able to access them later if problems occur
during installation.
♦ Insert the supplied program CD into your CD drive of your com-
puter. The installation menu starts automatically.
♦ Click on the “Installation” button to start the installation.
♦ Install the software as described in the on-screen instructions.
To Next Page
Loading...