Silvercrest SPB 3000 D4 - Using Your Power Bank; Checking and Charging the Power Bank

18 – English SPB 3000 D4
Status
display:
charging
process
Status
display:
check charge
level
Charging
capacity
(approx.)
2 LEDs
are lit, the
3rd LED is
fl ashing
2 LEDs are
lit
10–40%
1 LED is lit,
the 2nd LED
is fl ashing
1 LED is lit 1–10%
1 LED is fl ashing 0–1%
All LEDs are
off
Empty
Charging the power bank
The power bank can be charged with a PC or a
mains adapter by using the supplied USB cable.
Fully charge the power bank before using it.
ATTENTION! Risk of damage!
 Only charge the power bank on USB 3.0
ports (marked in blue), USB ports with a
minimum output current of 1 A, or with a
mains adapter with an output voltage of 5 V
and an output current of 2.1 A.