SPBH 3000 B2
■ 14
│
GB
│
IE
│
NI
♦ If charging does not start automatically, press
the ON button
briefly to start the charging
process.
NOTE
► Alternatively, you can also use the original
charger cable (USB cable) provided by the
respective device manufacturer.
♦ During the charging process, the current charge
level of the Power Bank is shown via the charge
level LEDs
(see table in chapter entitled
Charging the Power Bank).
♦ To end the charging procedure, disconnect the
charging cable
from the mobile device and
the Power Bank. The charging status LEDs go
off after about 20 seconds.
To Next Page
Loading...
