Silvercrest SPBH 3000 B2 - Device Operation; Checking Battery Charge Level; Charging External Mobile Devices

SPBH 3000 B2
GB
│
IE
│
NI
│
13 ■
Checking the charge level
You can also check the charge level of the Power
bank when it is not charged or is being used for
charging.
♦ Press the ON button
briefly. The LEDs show
the current charge level of the Power bank for
about 20 seconds.
LED display Charge level
All LEDs are on 76 - 100 %
Three LEDs are on 51 - 75 %
Two LEDs are on 26 - 50 %
One LED is on 10 - 25 %
One LED is flashing orange < 10 %
All LEDs are off 0 %
Handling and operation
Charging mobile devices with the
Power Bank
♦ Insert the microUSB plug of the charging cable
into the microUSB charging port of the mobile
device, and insert the USB plug into the USB port
on the Power Bank. The charging process starts
automatically.