Silvercrest SPBS 5000 B2 - Variant B: Glass Pane Mounting

GB
│
IE
│
NI
│
9 ■
SPBS 5000 B2
Variant B
Variant B is suitable for attaching the device to a pane of glass.
♦ Attach the four suction cups
to the two brackets
,
as shown in “Figure B”.
♦ Push the suction cups
into the large holes.
♦ Now fasten the suction cups
by sliding them into the narrow openings.
♦ Now mount the brackets
on the underside of the device by pushing the
retaining lugs into the corresponding slots on the rear of the device and locking
them in place.
Figure B
♦ You can now attach the device to a pane of glass using the suction cups
.