EasyManua.ls Logo

Silvercrest SPBS 5000 B2 - Handling and operation; Switch the device on;off; Display charge level

Silvercrest SPBS 5000 B2
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB
IE
NI
 11
SPBS 5000 B2
A rough estimate of the charge level is shown during charging by means of the
charge level LEDs
.
Charge level LEDs
Charge level
One LED is flashing < 25%
One LED is on, the second LED is flashing 25–49%
Two LEDs are on, the third LED is flashing 50–74%
Three LEDs are on, the fourth LED is flashing 75–99%
All LEDs are on 100%
Handling and operation
Switch the device on/off
Switching on
Press the ON/OFF button
briefly to switch on the power bank. The charge
level LEDs
light up for about 15 seconds.
The
LED lights up blue as long as a connected device is being charged.
Automatic switch-off
If no device is connected for charging within 15 seconds, the power bank
switches off automatically to conserve its battery.
Switching off
Press and hold the ON/OFF button
for at least 2 seconds to switch off the
power bank and stop the charging process. The
LED goes out.
Display charge level
Press the ON/OFF button briefly to show the charge level of the non-loaded
battery for a few seconds. The charge level LEDs
provide you with informa-
tion about the approximate charge level.
Charge level LEDs
Charge level
All LEDs are on 75 -100 %
Three LEDs are on 50 - 74 %
Two LEDs are on 25 - 49 %
One LED is on 5 - 24 %
One LED is flashing < 5 %
All LEDs off 0 %

Table of Contents

Related product manuals