Silvercrest SPU 900 A1 - Technical Data; Safety Information; Warning: Risk of electric shocks.

- 2 -
ProjectionAlarmClock
SPU900A1
Introduction
Congratulations on the purchase of your new
appliance.
You have clearly decided in favour of a qual-
ity product. These operating instructions are
a part of this product. They contain important
information in regard to safety, use and dis-
posal. Before using the product, familiarise
yourself with all of these operating and safety
instructions. Use the product only as described
and only for the specied areas of applica-
tion. Retain these instructions for future refer-
ence. In addition, pass these documents on,
together with the product, to any future owner.
Copyright
This documentation is copyright protected.
All rights including those of photographic
reproduction, duplication and distribution by
means of particular methods (for example
data processing, data carriers and data net-
works), wholly or partially as well as substan-
tive and technical changes are reserved.
IntendedUse
This radio alarm is intended for displaying
the time and for the reception of VHF and
MW radio programmes. Additionally, the ap-
pliance is tted with an alarm function using
either radio or a signal tone.
This radio alarm is not intended for use in
commercial or industrial applications. No
warranty is provided for damages resulting
from improper use of the appliance!
Itemssupplied
1 Projection Alarm Clock SPU 900 A1
1 Operating manual
TechnicalData
Power supply: 220-240 V
~
, 50 Hz
Power consumption
in radio operation: 5 Watt
Standby: 1.2 Watt
Output level: 2 x 450 mW
bei 10% THD
Frequency range : VHF (FM)
87.5 – 108 MHz
MW (AM)
526.5 – 1606.5 kHz
Operating
temperature: + 5 – +35 °C
Storage
temperature : -20 – +50 °C
Humidity: 5 – 90 %
(No condensation)
Dimensions
(W x H x D): 21 x 7 x 14.1 cm
Weight : 870 g approx.
Protection class: II /
Backup Batteries 2 x 1.5 V, Type AAA/
Micro (not supplied)
Safetyinformation
Warning
A warning of this danger level signies a pos-
sible dangerous situation. If the dangerous
situation is not avoided it can lead to injuries.
Follow the directives in this warning notice, so
as to avoid personal injuries.
Important
A warning of this danger level signies pos-
sible property damage. If the situation is not
avoided it can lead to property damage. The
directives in this warning are there to avoid
property damage.
Notice
A notice signies additional information that
assists in the handling of the appliance.
Warning: Risk of electric shocks.
• Connect the appliance only to correctly
installed and earthed mains power sock-
BDA_SPU 900 A1 - TOZ-75878_6_en.indd 2 11.06.2012 11:33:26