Wakening with the alarm tone
When the alarm time is set correctly, as described above:
1. Repeatedly press the button AL1
y
resp. AL2
u
until the symbol for the
alarm tone appears in the display
j
. At the programmed time the
alarm tone will now switch itself on.
2. Press the button
o
to switch the alarm tone off until the following day.
3. To deactivate the alarm function, repeatedly press the button AL1
y
resp.
AL2
u
until a symbol is no longer shown next to the indicator for the
alarm function resp. in the display
j
. After about 5 seconds the
device returns to just a time display and the indicator for the alarm
function disappears.
Snooze Function
Activation of the button SNOOZE
e
interrupts the alarm tone or the radio
for about 10 minutes. After these 10 minutes the alarm procedure is repeated.
• Press the button
o
to switch the alarm function off until the following
day.
- 12 -
To Next Page
Loading...
