- 2 -
TRAVEL HAIRDRYER
Safety instructions
Reduce the risk of electric shock
• ALWAYS set the voltage selector on the hairdryer to the rating of
the local power supply. UNDER NO CIRCUMSTANCES should
you operate the appliance on a 230-240 V mains supply when
the voltage selector switch is set at 120 V (or vice-versa). It would
destroy the appliance and the guarantee would be void. Adjust
the voltage selector e with a coin. Make enquiries about the rating
of the local electrical mains supply with the energy supplier or with
the hotel personnel. First when this has been done insert the plug
into a power socket and then switch your travel hair dryer on.
• Connect the travel hair dryer only to correctly installed mains power
sockets with a current rating of 120/230 -240 V at 60/50 Hz.
Under no circumstances may the appliance be submersed in
fluids or fluids be allowed to permeate the housing.
• Do not expose the appliance to humidity and do not use it outdoors.
Should liquids enter the housing, unplug the appliance from the
power socket immediately and have it repaired by a qualified
technician.
To Next Page
Loading...
