EasyManua.ls Logo

Silvercrest SRR 3.7 D5 - Shaver Operation with Mains Adapter; Using the Trimmer and Long Hair Trimmer

Silvercrest SRR 3.7 D5
75 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
GB
4. Figure A: push the protective cap15
downwards off the shaving attach-
ment5.
5. Switch on the device with the on/off
switch9.
Transport lock
If the transport lock is activated, the lock
symbol12 flashes.
Press and hold the on/off switch9 for
approx. 4 seconds, in order to switch
the transport lock on/off.
Connecting the power unit
19
deacti-
vates the transport lock, which cannot be
activated during mains operation.
Changing the shaving/beard
trimmer attachment
WARNING! Risk of injury!
~ Switch off the shaver8, before you at-
tach or remove the attachments.
1. Figure A: slide the protective cap15
onto the shaving attachment5 from be-
low, with the opening first.
2. Figure B: turn the attachment3 or5 a
little bit anticlockwise and then pull it
off the shaver8.
3. Figure C: insert the attachment3 or5
with the groove into the recess of the
motor unit for attachments7. Turn the
attachment a little bit clockwise. Ensure
that the attachment is firmly attached to
the shaver8.
Pushing on/removing the comb
attachment
WARNING! Risk of injury!
~ Switch off the device before replacing
or changing a comb attachment1.
Pushing on
In order to attach the comb attach-
ment1, push it over the guide rails on
the side of the device onto the beard
trimmer attachment3, until it is heard to
click into place.
Removing
1. Push the comb attachment1 upwards
using a moderate amount of force. The
comb attachment1 separates from the
beard trimmer attachment3.
2. Remove the comb attachment1.
Shaving
DANGER! Risk of electric shock
due to moisture!
~ The shaver8 and the power unit19
are not waterproof and are therefore
not allowed to be used in a shower/
bath.
Dry shaving (Rechargeable battery
and mains operation)
Hold the blade unit4 parallel to the sur-
face of the skin, and gently move it over
your face using circular motions.
Shave against the direction of your
beard growth.
Stretch your skin in complicated areas,
such as the chin, to achieve better re-
sults.
Switch off the device after shaving,
clean the parts carefully and to protect
the shaving heads4, slide the protec-
tive cap15 onto the shaving attach-
ment5 from below.
__390153_Rotationsrasierer_Short_OS.book Seite 11 Montag, 23. Mai 2022 1:02 13

Other manuals for Silvercrest SRR 3.7 D5

Related product manuals