8 GB
Technical data
Operating voltage 230 V∼, 50 Hz
Rated current 5 A
Rated power max. 1150 W
Protection class I /
Ingress protection IP44
Model number Max. total output
HG09690B 1150W (5A)
HG09690B-FR 1150W (5A)
Before first use
Indoor use
Plug the product into power supply which
should near window in order for the twilight
sensor
[3] to differentiate between night and
day.
Outdoor use
Plug the product into an outdoor splash-proof
power outlet.
The power plug of the connecting device must
also be splash proof.
Close the cover
[1] while without connecting
device is connected to the product.
Attention:
Without light near the twilight sensor
[3] to
prevent malfunction.
The twilight sensor
[3] should not be covered
in any way.
The product should not be located directly next
to the window to avoid direct sunlight.
Mode Function
OFF - The connected device is OFF
ON - The connected device is ON
2Hrs - The connected device will be on at
dusk; and countdown switch OFF in 2 hours
automatically. The product turns off automatically
when the countdown elapses.
4Hrs - The connected device will be on at
dusk; and countdown switch OFF in 4 hours
automatically. The product turns off automatically
when the countdown elapses.
6Hrs - The connected device will be on at
dusk; and countdown switch OFF in 6 hours
automatically. The product turns off automatically
when the countdown elapses.
8Hrs - The connected device will be on at
dusk; and countdown switch OFF in 8 hours
automatically. The product turns off automatically
when the countdown elapses.
DUSK-DAWN : The connecting device turns on
automatically at DUSK. The connecting device
turns off automatically at DAWN.
Hints
In the process of countdown, if twilight sensor
[4] detects the day light, the countdown function
will be disabled, If it detects the dusk again, the
countdown will re-start from the very beginning.
In the process of countdown, if change the mode
manually. This will disable the current one, and
enter into the new one.
Turning On/ off
Turn off the connecting device which will
connect
Plug the connecting device into the power
outlet
[2] of the product.
Plug the product from the power supply.