GB
│
IE
│
NI
│
CY
│
7 ■
SSM 350 A1
Assembly
WARNING! RISK OF INJURY!
► Do not insert the plug into the mains power socket until the appliance is
fully assembled.
NOTE
► Before first use, clean all parts as described in the chapter "Cleaning".
WARNING! RISK OF INJURY!
► The blade 5 is extremely sharp! Handle it with great care at all times.
■ Place the blender 4 onto the motor unit 3 so that the arrow S points at
the
symbol. Rotate the blender 4 towards the symbol until it clicks
into place.
Operation
You can use the blender 4 to make sauces, soups or dips. We recommend that
you operate the hand blender for max. 1 minute at any one time and then let it
cool off for about 1 minute.
WARNING! RISK OF INJURY!
► The foods being processed must not be too hot! Splashing contents could
scald the user.
CAUTION – PROPERTY DAMAGE!
► Do not attempt to process hard foods with the appliance. This will cause
irreparable damage to the appliance!
Once you have assembled the appliance:
1) Insert the power plug into the mains power socket.
2) Slide the blender 4 vertically into the food you wish to purée.
3) Hold the switch
1 to process the food at a normal speed.
4) Hold the TURBO switch 2 to process the food at a high speed.
NOTE
► Use the normal speed for soft food and the turbo speed for firmer food.
5) Once you are done processing, simply release the pressed speed control
button 1/2. Remove the blender 4 as soon as the blade 5 stops rotating.
IB_331075_SSM350A1_LB6_GB_IE_NI_CY.indb 7 10.02.2020 08:20:09
To Next Page
Loading...
