To Next PageTo Next PageHow to fix a Silvercrest SSR 3000 A1 Vacuum Cleaner that is not working?
If your Silvercrest Vacuum Cleaner is not working, it could be due to several reasons: * The battery may not be fully charged, so ensure you charge it fully. * The power switch might be set to “O”; switch it to “I”. * The battery contacts could be dirty; clean the charging contacts and the battery contacts on the product.
Why does my Silvercrest SSR 3000 A1 Vacuum Cleaner have poor suction power?
If your Silvercrest Vacuum Cleaner has poor suction power, first check if the suction vent is blocked. Also, the dust collector might be full, or the filters are blocked. In this case you should clean the dust collector and the filters.
What to do if my Silvercrest SSR 3000 A1 Vacuum Cleaner shows error E04?
If your Silvercrest Vacuum Cleaner displays error code E04, it means the product was lifted up. Place the product back on the floor.
What does error E05 mean on a Silvercrest Vacuum Cleaner?
If your Silvercrest Vacuum Cleaner displays error code E05, it means that the anti-drop sensor has failed. You should clean the anti-drop sensor.
What does error E01 mean on a Silvercrest Vacuum Cleaner?
If your Silvercrest Vacuum Cleaner displays error code E01, it indicates that the left side wheel does not turn. You should check the left side wheel and clean it if necessary.
What does error E02 mean on a Silvercrest SSR 3000 A1 Vacuum Cleaner?
If your Silvercrest Vacuum Cleaner displays error code E02, it indicates that the right side wheel does not turn. You should check the right side wheel and clean it if necessary.
General| Filter type | HEPA filter |
|---|---|
| Charging Time | Approx. 5 hours |
| Functions | Vacuuming |
| Dust bag capacity | Bagless |
| Cable length | Not applicable |
