Silvercrest SSTF A1 - Page 69

68 GB/IE
 Replacing the battery
(Fig.C)
1. Place the product on a flat, firm
surface with the bottom cover[4]
facing upwards.
2. Insert the tip of the tool[7] into the
gap[2].
3. Rotate the tool[7] by 90° to separate
the top cover[1] from the bottom
cover[4].
4. Remove the old battery[5] from the
battery compartment[6].
5. Insert a new battery into the battery
compartment[6]. The positive pole (+)
on the battery must face upwards.
6. Align the gaps[2] of the top cover[1]
and the bottom cover[4] and close
the product.
INFO: If the product has already
been paired before and you insert
a new battery, the product will
automatically restart the pairing
process. The buzzer[3] emits
2beeps to indicate that the product is
successfully paired.