GB
46
19) Connecting the 2in1 Tablet to a television
You can transfer the images and sound from your tablet to a
suitable television via HDMI cable or Miracast.
Connecting to a television via HDMI cable
To connect the tablet to a suitable television via HDMI, you require
an appropriate cable (Micro-HDMI to HDMI, available in
specialist shops).
Connect the tablet (Micro-HDMI socket, F) and the television using
the cable and, on the television, select the correct HDMI input as
the source (the HDMI input to which the cable is connected). The
television now shows the display of your tablet.
Connecting to a television via Miracast
Miracast technology is a peer-to-peer standard for image transfer.
The tablet supports this standard and enables wireless transfer of
image and sound from the tablet to a WiFi and Miracast-enabled
television set.
i
NOTE
The tablet can connect to your television via Miracast
only if the television also supports
Miracast technology. Please check
with your television manufacturer if necessary.
Proceed as follows to connect your tablet to a Miracast-enabled
television:
a) First, take all of the necessary steps to prepare your Miracast-
enabled television for the Miracast transfer (consult your television’s
operating instructions for details).
To Next Page
Loading...