EasyManua.ls Logo

Silvercrest STS 850 D1 - Before Taking into Use; Adjusting the Browning Level

Silvercrest STS 850 D1
28 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
STS 850 D1
GB
 19
Setting up
CAUTION – RISK OF FIRE
You should therefore NEVER locate the appliance close to or underneath
inflammable objects, especially not under curtains or suspended cupboards.
Unwind the cable completely from around the cable winder and lead it
through the cable clamp .
Place the appliance on a level and heat-resistant surface.
Insert the plug into a mains power socket.
NOTICE
When the toaster is not in use, always remove the plug from the mains power
socket. This is the only way to ensure that the appliance is current-free.
Before taking into use
Operate the toaster without bread for 3 times at the maximum browning
level “7“.
Afterwards, clean the toaster as described in the chapter "Cleaning".
NOTICE
The operating slide only engages when the cable is connected to a
mains power socket.
With the first usage a slight smell can arise (minimal smoke development is
also possible). This is normal and dissipates after a short time. Provide for
sufficient ventilation. For example, open a window.
Operation
Adjusting the browning level
The desired level of browning, from "light" (1) to "dark" (7), can be adjusted
infinitely with the toasting dial .

Related product manuals