48 GB/IE
Reset
To reset the headphones, follow below steps:
Disconnect the left and the right headphone [1] from a playback device:
– Remove one of the headphones (left or right) from the charging/storage
box [6].
Press the MF button [2] 3 times in quick succession until the LED [4]
briefly flashes red/white.
Insert the previously removed headphone back into the charging/storage
box [6] to complete the reset.
– Remove the other headphone from the charging/storage box [6].
Press the MF button [2] 3 times in quick succession until the LED [4]
briefly flashes red/white.
Insert this headphone back into the charging/storage box [6] to
complete the reset.
Both headphones [1] are now successfully reset.
NOTE: However, the Bluetooth connection to the playback device remains.
Headset for phone calls / Playback control
You can use the headphones as a headset for phone calls and to control
playback.
The table describes operation with a connected smartphone. Other devices
may react differently.
To Next Page
Loading...
