Silvercrest STVM 15 A1 User Manual

16
GB
5. Operation
5.1 Putting the device into
operation and switch-
ing it off
1. Insert the mains plug7 into a mains
socket corresponding to the technical
data.
2. Switch on the power supply by turning
the dial1 to position2,3,5 or6.
3. Switch off the power supply by turning
the dial1 to position4 (0).
5.2 Setting the blower levels
With the blower levels you can choose how
quickly the device circulates the air in the
room.
The device has two blower levels:
- Level I (weak): turn the dial1 to posi-
tion5;
- Level II (strong): turn the dial1 to po-
sition3.
5.3 Swivel function
The device has a swivel function.
This enables the device to swivel back and
forth and thereby distribute the outflowing
air more uniformly in the room:
1. Switch on the swivel function by turning
the dial1 to 2 for the strong blower
level or 6 for the weak blower level.
2. Switch off the swivel function by turning
the dial1 to position3 or5.
6. Cleaning
In order to enjoy your device for a long time,
you should regularly clean it.
DANGER! Risk of electric
shock!
~ Disconnect the mains plug before any
cleaning.
~ Never immerse the device in water.
~ Do not let water or cleaning agent run
into the device.
WARNING! Risk of material damage!
~ Do not clean using sharp objects or
abrasive cleaning agents.
1. Carefully remove coarse dust deposits
with a vacuum cleaner.
2. Clean the outside of the device with a
slightly damp cloth. You can also use a
little detergent.
3. Wipe off with a cloth that has been
moistened with clean water.
4. Do not use the device until it is com-
pletely dry again.
GB_353124_2007.fm Seite 16 Montag, 14. Dezember 2020 2:33 14

Silvercrest STVM 15 A1 Specifications

General

Brand	Silvercrest
Model	STVM 15 A1
Category	Fan
Language	English