SilverCrest STVM 30 B2
8 - English
• Never use the product near inflammable materials such as
curtains. Maintain a clearance of at least 50 cm around the
product to flammable and combustible materials.
Do not expose the fan to any direct heat sources (e.g. heaters),
direct sunlight or artificial light. The device must not be exposed
to spray or dripping water or abrasive liquids. Do not use the
product near water. It is especially important that the product is
never immersed (do not place any containers containing liquids
such as drinks, vases, etc. on the product). Make sure that the
product is not subject to excessive shocks or vibrations. Do not
introduce any foreign bodies into the device.
6. Copyright
All the contents of this user manual are protected by copyright and provided to the reader for
information only. Copying data and information without the prior explicit written consent of the author
is strictly forbidden. This also applies to any commercial use of the contents and information. All texts
and diagrams are up to date as of the date of printing. Subject to change without notice.
7. Before you start
Unpacking
• Remove the product from the packaging.
• Remove all package material.
• Check the packaging for any missing contents. Please contact Customer Service immediately
if any items are missing.
8. Getting started
8.1 Switching the fan on and off/adjusting the fan speed
Proceed as follows to getting started using the fan:
• Select a location according to the safety instructions.
• Operate the fan on a flat, stable surface.
• Insert the mains plug into a properly installed mains socket.
To Next Page
Loading...
Need help?
General
