SilverCrest USB 2.0 Video Grabber SVG 2.0 A1 English
3
Intended use
The SilverCrest USB 2.0 Video Grabber SVG 2.0 A1 changes analogue
information e.g. from a camcorder, into digital information that can be saved
onto a PC and post processed. The device can only be used with a USB 2.0
port. USB 1.1 standard is not supported. The device may not be connected to
a USB 1.1 port.
This is an information technology device. This product may only be used for
private purposes. It is not to be used for industrial or commercial purposes.
This product is not designed for medical, lifesaving or life sustaining
applications. The device should not be used outside or in tropical climates.
Only connection cables and external devices which are designed for this
product in terms of safety, electromagnetic compatibility and shielding quality
may be used in conjunction with the unit. This device fulfils all relevant norms
and standards in conjunction with CE conformity. Compliance with these
norms is no longer guaranteed if the device is altered in ways not sanctioned
by the manufacturer. Only use accessories specified by the manufacturer.
When this device is used outside Germany compliance is required with the
regulations and laws of that country. When connecting ensure that the cable is
not too taut and the connector plug is not stressed.
Children
Electrical devices do not belong in children's hands. Never allow children to
use electrical devices unsupervised. Children cannot always recognise
possible hazards. Keep packaging away from children as it is a suffocation
risk.
Electromagnetic Compatibility
The Electromagnetic Compatibility Directive (EMC) must be adhered to when
connecting the device. Ensure that there is a minimum distance of 1m from
high frequency and magnetic sources of interference (e.g. TVs, speakers,
mobile phones etc) in order to prevent malfunctions and loss of data.
To Next Page
Loading...
Need help?
General
