Silvercrest swv 300 b2 - WPS - the Easiest Type of Configuration

SilverCrest SWV 300 B2
English - 149
WPS - The easiest type of configuration
This is the easiest way to configure the dual-band wifi range extender. First,
check whether your wireless router supports WPS. For further details, please
read the operating instructions for your wireless router.
1. Press the WPS button (6) on the dual-band wifi range extender for at least 6
seconds. The Power/WPS LED (3) now flashes for approx. 2 minutes.
2. Within these 2 minutes, please press the connection button (WPS) on your
wireless router. For further details, please read the operating instructions for
your wireless router.
(Symbolic representation, connection button (WPS) can be differently arranged
and referred to depending on the router model.)