Silvercrest VG 2000 - Audio Adapter Cable

English SilverCrest USB 2.0 Video Grabber VG 2000
• The operating system will automatically detect the Video Grabber. Follow
the instructions on the screen.
• Use the enclosed software to record from your source. The software
provides detailed usage instructions in electronic format. Start the relevant
program.
Audio adapter cable
Using the audio adapter cable (number 4, stereo RCA cable to 3.5mm jack
plug) you can also connect your audio source directly to your PC and so the
device is used as an audio grabber.
Then proceed as follows:
• Connect the audio source directly to the audio input on your soundcard.
Use the audio adapter cable (4).
• Start the 'Cyberlink PowerDirector' program and click on the microphone
symbol.
• Click on the option 'Settings'.
• Choose your soundcard as the 'Audio device' (not Video Grabber
Capture!).
• Finally choose the button 'Mixer' as the recording source for your
soundcard. The setting of the recording source and recording level is made
in the menu 'Option>Adjustment'.
10