EasyManua.ls Logo

Silverline 656578 - User Manual

Silverline 656578
42 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
www.silverlinetools.com
656578
Air Ratchet Wrench
13mm (
1
⁄
2
")
AIR
S
I
L
V
E
R
L
I
N
E
R
A
N
G
E
Air Ratchet Wrench
Clé à cliquet pneumatique
Druckluft-Ratschenschrauber
Llave de carraca neumática
Avvitatore a cricchetto pneumatico
Pneumatische ratelsleutel
656578_Z1MANPRO1.indd 3 02/07/2013 09:19

Table of Contents

Questions and Answers

  • M
    Miranda GarciaJul 27, 2025
    Why is my Silverline 656578 Nail Gun operating slowly?
    • T
      tamara13Jul 27, 2025
      If your Silverline Nail Gun is operating slowly, there are several potential causes and solutions: * **Incorrect Pressure:** Ensure the air pressure is set correctly according to the tool's specifications. * **Dirt in Mechanism:** Pour oil into the air inlet following the maintenance instructions. * **Air Blockage:** Operate the tool in short bursts to clear any blockages. * **Air Leak:** Check all fittings and the hose for air leaks. Retighten, use PTFE tape, or replace parts as needed. * **Blockage in Filter:** Remove the Quick Connector and clean the mesh filter.
  • R
    Rodney LambAug 6, 2025
    What to do if my Silverline 656578 will not stop after trigger is fully released?
    • L
      Lisa SchwartzAug 7, 2025
      If your Silverline Nail Gun won't stop after releasing the trigger, it's likely due to a damaged throttle valve O-ring or valve seat. The suggested solution is to have the tool repaired at an authorized Silverline service center.
  • Y
    yortizAug 17, 2025
    How to fix a seized Silverline Nail Gun?
    • P
      Paul SimsAug 17, 2025
      If your Silverline Nail Gun has seized, it could be due to dirt or rust in the mechanism. Try the solutions suggested for a tool operating slowly. Additionally, you can gently tap the tool with a soft mallet or try to free the mechanism by manually rotating the drive when it's disconnected from the air line.

Summary

Specifications

Noise and Vibration

Sound

Vibration

General Safety

Projectile Hazards

Advice on avoiding high-velocity projectiles during tool operation and protective measures.

Safety Hazards

Entanglement and Operating Hazards

Risks from loose clothing, jewelry, and direct contact with moving parts.

Repetitive Motion and Accessory Hazards

Discomfort from repetitive tasks and dangers from accessories.

Workplace, Dust, and Fume Hazards

Risks from slips, falls, dust disturbance, and toxic fumes.

Noise and Vibration Hazards

Preventing hearing loss and nerve damage from noise and vibration exposure.

Additional Safety Instructions for Pneumatic Power Tools

Product Familiarisation

Before Use: Fitting the Quick Connector

Air Supply Connection and Operation

Air Supply Connection

Setting Tool Power

Attaching Sockets

Select Direction

Operation

Maintenance and Storage

Maintenance

Cleaning procedures, daily lubrication, and filter requirements.

Troubleshooting

Tool Operating Slowly

Possible causes and solutions for slow tool operation.

Tool Seized

Tool Will Not Stop After Trigger is Fully Released

Silverline 656578 Specifications

General IconGeneral
BrandSilverline
Model656578
CategoryNail Gun
LanguageEnglish

Related product manuals